|
| |
 |
|
Architectual
Roller Blinds
- Specifically
designed for all commercial applications with minimal
deflection on oversized blinds
- Unique
endplug with lock system for 100% reliability
- Universal
robust brackets tested to 30kgs pull force
- Lift
assistance springs for ease of operation on large
blinds
- Motorised
options including motors with integrated radio receiver
- 5
year warranty on all hardware
To
download the full operation manual on the SR
Series please click here |
 |
 |
OR
CALL US NOW ON 01293 851010 FOR MORE INFORMATION
|
|
DO
NOT SETTLE FOR ANYTHING LESS IN ROLLER SCREEN SYSTEMS
|
32/36
Decelerator Roller Blind
|
|
- Hook
the charging handle into the inner part of the spring
and pull out.
- To
increase charge, wind the handle in a clockwise direction.
To decrease existing charge, wind the handle in an
anti-clockwise direction
- When
desired charge is found, replace inner part of spring
and remove handle.
|
- If
you are not certain spring is stopped at top limit,
give spring (flat) pin a quick "twitch"
and release. The spring will un-wind to top limit
position.
- Fit
blind into brackets with cloth rolled to upper position.
- To
fine adjust top position, squeeze and twist plastic
part of fixing bracket.
|
| |
Obscura
48mm Roller Blind
|
| |
Obscura
general specification sheet - pdf |
| |
|
Side
Control Systems 32, 40, 45
|
| |
The
Side-Control Roller Blind Systems were developed to
provide excellent performance over a wide range of
window blind sizes, fabric weights and fabric thickness'.
The manufacturing process does not involve the use
of adhesives or sewing and always produces a clean
and professional finish to the blind.
The
three systems are designed for progressively larger
and heavier blinds and the diameters of the sprockets
for the control chains increase accordingly to enable
larger blinds to be operated with the minimum physical
effort. Additionally 'System 32' end sets are available
in two versions with differing operating weights.
Therefore, each system is offered with a choice of
metal or plastic control chain.
Side-Control
roller tubes and bottom bars are designed with patented,
longitudinal fabric fixing slots of varying widths.
The manufacturing method used ensures that the fabric
will remain firmly attached to the roller and will
not become detached in normal use. The varying widths
of the slots allow fabrics of various thickness' to
be accommodated easily. An added benefit of the slots
is that they increase the rigidity of the tubes, enabling
blinds to span wider openings without risk of the
tubes 'whipping' when the blind is operated.
|
|
Our patented, safety-first end cap locking system prevents
the blind from coming out of its brackets if the blind
is operated incorrectly. These end sets have mounting
brackets which are truly 'universal'. They can be top,
face or side fixed and can be used for blinds with left
hand or right hand control. The ease of instantly switching
end sets from one end of the roller to the other is
an added benefit; plus the problems of having blinds
supplied with the controls on the wrong side - or with
the wrong brackets - are overcome.
|
|
| |
GENERAL APPLICATIONS
Side-Control
Systems 32, 40 and 45 are suitable for use in any
roller blind installation where reliability, operator
ease of use and minimum maintenance requirements are
a prerequisite.
The
integrated design features of Side-Control Systems
32, 40 and 45 make them particularly suitable for
projects featuring a variety of window sizes used
in differing applications.
MAINTENANCE
Side-Control
Roller Blind Systems are made in corrosion resistant
plastic, aluminium and optionally powder coated steel
and are expected to prevent any problems if used under
normal circumstances in non-corrosive environments.
The methods of construction minimise damage caused
by operator misuse. Any damage which may occur can
normally be rectified easily on site.
|
|
TECHNICAL
SPECIFICATIONS - OPEN AND PRINT
|
|
| |
|
|
|
| |
| |
Neat
and stylish the fascia system really does add the finishing
touch to the interior design of any commercial project.
This contemporary fascia houses a market leading roller
blind system that has a proven track record for reliability
and control. Made from extruded aluminium this robust
fascia system fits inside or outside the window recess
safely and securely. The fascia system utilises the 40+,
45 and 45+ roller blind systems, which together can easily
accommodate blinds for a variety of today's commercial
premises and carry all of the market's commercial fabrics
and screen. Available in white or anodised aluminium the
fascia conceals the roller blind mechanisms effectively,
enhancing the aesthetic appeal of the modern workplace. |
 |
| |
- Available
in white or anodised aluminum.
- Ideal
for large commercial installations.
- Will
accommodate heavier fabrics such as screen and blackout.
- Made
to measure and professionally fitted.
- Improved
safety of installation and operation.
- Face
fix or top fix to fit into most window apertures neatly.
- Market
proven robust roller blind system
- Compliments
any interior design scheme.
|
| |
| Architects,
specifiers and installers are increasingly stipulating
roller blind systems as their primary product in commercial
and municipal projects. In order to meet the challenges
of the modern workplace. Systems 40+ and 45+ have been
designed as the latest development of the market leading
side control roller blind system. The key to their design
is the larger sprocket size in the end sets. This enables
the system to comfortably carry heavier and larger commercial
fabrics. The fabrics are carried on a grooved aluminium
tube, which offers both strength and stability to the
blind. Both systems can be installed into most window
recesses with safety location brackets and with the
option of either metal or plastic operation chains,
Systems 40+ and 45+ are a winning combination for any
design project. |
 |
| |
- Patented
safety-first end cap locking system.
- All
components are robust and corrosion resistant for
durability.
- The
enlarged sprocket offers a smoother and lighter operation
when adjusting the blind.
- Designed
specifically to handle commercial fabrics and screen
products.
- Easy
to install.
 Available
with either metal or plastic chain.- Double
or triple groove aluminium tube for strength and performance.
|
 |
CONTROL
IS ONLY A "TOUCH" AWAY... LITERALLY! INTRODUCING
THE LR1000 WITH "TOUCHCONTROL™."
Gone
are the days of losing the remote control without another
way to operate the shade! The LR1000 provides multiple
control options including TouchControl™. By simply
touching the bottom, the shade will raise or lower automatically,
Touch it again, and the shade stops! |
|
DOWNLOAD
SPECSHEET AND TECHNICAL DATA HERE - PDF |
|
|
theblindco.com
also supply the following product ranges:
Louvolite
Eclipse
Arena
Hexcel
Turnils
New House
|
Operation
and Maintenance Manual
Roller
Blinds
|
| |
See
our Sunscreen section
for roller systems with specialised commercial fabrics.
|
|
For
further information on these or any of our products
contact
theblindco.com team via the contact
us section of this website or call on 01293-851010
|
